Conventional Dense Castables
Cement-bonded castables for general-purpose linings. Easy to install and forgiving on site.
Low Cement Castables (LCC)
Lower cement content means higher hot strength, lower porosity and better slag resistance.
Ultra-Low Cement Castables (ULCC)
Maximum density and hot strength for severe thermal and mechanical duty.
Self-Flow Castables
Flows around anchors and into complex forms without vibration, for dense, joint-free linings.
Alumina-SiC Castables
Silicon carbide boosts erosion, slag and thermal shock resistance.
Tabular Alumina / Mullite Castables
Tabular alumina or mullite aggregate for high purity, low creep and stable volume.
Abrasion-Resistant Castables
Engineered for cold crushing strength and erosion resistance under particulate flow.
Aluminium-Resistant Castables
Non-wetting additives resist molten aluminium penetration and corundum growth.
Phosphate-Bonded Castables
Phosphate bond gives strong adhesion, early strength and abrasion resistance.
Acid-Resistant Castables
Formulated to resist acid condensate and chemical attack.
Insulating Castables
Lightweight grades that cut heat loss and shell temperature as backup or low-duty hot-face linings.
Dense Gunning Mass
Dry-gunned for fast installation and repair of large areas without formwork.
Shotcrete / Wet-Gunning Castables
Pumped wet and sprayed, giving castable-quality linings with minimal rebound and dust.
High-Alumina Ramming Mass
Rammed in place for dense, crack-resistant monolithic linings.
Plastic Refractories
Mouldable mixes hand-rammed or pounded around anchors, with excellent thermal shock resistance.
Refractory Mortars
Air- and heat-setting mortars matched to every Crown brick grade for strong, tight joints.
Patching & Coating Mixes
Quick repair and protective coatings that extend lining life between relines.
PCPF Shapes
Precast, dried and pre-fired under controlled conditions. They arrive ready to install, so there is no on-site curing.
64 grades across 13 families
Every grade is made at our Wankaner works and packed in 25 kg bags marked with batch number, manufacturing month and best-before date. Select any grade to request its datasheet.
Specify your next lining with confidence.
Share your furnace, kiln or vessel details. Our technical team will recommend the right grade and send the datasheet.
Alumina bricks, monolithics and speciality refractories, manufactured in Wankaner, Gujarat since 1979.
Crown Ceramics
8/A, National Highway, Near Hasanpar Railway Crossing, Wankaner, Dist. Rajkot, Gujarat 363622, India
+91 99746 66341
info@crownceramics.in